Using the 510 Thread Magnetic Ring:
- Get your select 510-threaded cartridge.
- Take the Magnetic Ring and connect it to the threaded connections at the bottom of the cartridge.
- Slide the cartridge + Magnetic Ring combo into your device.
Note: The magnetic adapter can be used with various 510-threaded cartridges. Be careful not to over-tighten the Magnetic Ring, as it may become loose and interfere with the power supplied by the battery.
Cleaning the Magnetic Ring:
- Detach the chosen cartridge from your device by pulling it away from the unit.
- Twist the Magnetic Ring counterclockwise to unscrew it.
- Clean the interior threading of the Magnetic Ring using a cotton swab.
- Screw the Magnetic Ring back into place on the 510-threaded cartridge.
Note: If cleaning a hardened cartridge with a moist or damp cotton swab, let the Magnetic Ring dry entirely before reconnecting it to your 510-threaded cartridge. A small brush can eliminate any dirt or debris from the threaded section's crevices if necessary.
Troubleshooting the Magnetic Ring:
- Detach your cartridge from the Magnetic Ring.
- Unscrew the Magnetic Ring.
- Replace the Magnetic Ring, being careful not to over-tighten the magnetic connector.
- Reinsert the cartridge with the connector back into the battery.
Note: In some instances, the battery may not recognize the cartridge. Following the troubleshooting steps above and the previously outlined cleaning procedures can help you resolve this issue. When attaching the Magnetic Ring to the 510-threaded cartridge, cease tightening the connector once you feel resistance.
The Magnetic Ring is compatible with cartridge brands, including 3CHI, Tree Top Hemp Co., No Cap Hemp Co., Urb, Good CBD, Injoy Extracts, Delta Effex, Canna Clear, Hometown Hero, The Hemp Doctor, Utoya, Delta Ape, Hempire, and many others!